BLOG
Fixture maintenance standards
Time:
2024-08-28
Due to continuous use of the fixture, there may be some debris
Due to continuous use of the fixture, there may be some debris or stains on its surface, so it should be cleaned in a timely manner to avoid contaminating the product or causing poor contact.
1. Cleaning methods:
① Regular or scheduled cleaning;
② Blow with compressed air;
③ Wipe with a cloth;
④ Clean with a brush.
Continuous use of maintenance fixtures may cause screws to loosen, springs to deviate, and ejector pins to malfunction.
2. Methods of maintenance:
① Regularly lubricate the parts that require lubrication;
② Tighten loose screws;
③ Check if it is necessary to replace accessories such as ejector pins and sockets.
3. Confirm maintenance status: Check if the label attached by the fixture manager is valid.
Confirmation method: visual inspection;
Solution: Expired replacement.
4. Repair: Defective fixtures should be promptly repaired or sent to the fixture team of the engineering department for repair.
5. Each shift inspection: Check if the status of the fixtures is normal.
Method of inspection: ① Visual inspection;
② Use defective boards to confirm whether the fixture can detect defective products.
Related News
What are the parameters of injection molding?
The production process of plastic products and plastic gears
2024-08-28
Due to continuous use of the fixture, there may be some debris
2024-08-28
The classification of fixtures can be divided into three categories
2024-08-28
What are the precautions for furnace fixtures
The furnace fixture is a tool used in the manufacturing process
2024-08-28
What are the requirements for furnace fixtures
The requirements for the furnace fixture mainly include the following
2024-08-28
Do you know about the application of new injection molding technology?
In recent years, scientific and technological workers on the plastic
2024-08-28
Share
